The Heavy Service series represents one ot the most popular mounting plates in the industrial world. We are pleased to offer a shock absorbing caster series with the same popular size. The unique and simple design enables Hamilton to offer these problem solvers at extremely competitive prices.
Spring loaded casters offer many benefits. These include protecting delicate cargo from shock and vibration, reducing noise levels, reducing wear on floors and extending caster, wheel and bearing life.
The legs are slotted such that the axle "floats" up and down as the wheel encounters obstacles. Since the spring is pre-loaded, the minimum capacity is required to cause the spring to yield. (A load under the minimum capacity may not result in any absorption of shock.)
At the maximum capacity, the spring will have compressed approximately one-half of its length. Overloading a shock-absorbing caster will cause the axle to reach its travel limit, resulting in no shock absorbing benefit.
These casters can be easily modified to accommodate many custom specification requirements. Our engineering department will assist you if you have special application issues.
NEVER DISASSEMBLE A SPRINGLOADED CASTER OR REMOVE THE WHEEL FROM THE CASTER.
#S-SPHS-8SPB Swivel w/ Poly-Soft® Wheel
#R-SPHS-6DB Rigid w/ Duralast® Wheel
The springs contain a tremendous amount of stored energy and serious injury could occur. This should only be done by trained factory personnel.